[OmniOS-discuss] fan control

[Alexander Lesle]

Hello Robert Fantini and List,

I use Supermicro boards
X8SI6-F
X8SIA-F
X10SLH-F
and they all works very well with OmniOS + NappIT.

On Mai, 25 2016, 14:34 <Robert Fantini> wrote in [1]:

> it is good to know that your Supermicro systems work normal with
> omnios.  I figured that would be the case.  Our issue is probably
> caused by hardware set up or bios.   


> IPMI/sensors show high voltage issues , and on board sata are not
> all working.. so the issue is hardware .  the motherboards are not designed for the chassis.



> napp-it/omnios/iscsi is working flawlessly .



> thank you all for the responses.


> On Wed, May 25, 2016 at 6:00 AM, Alexander Lesle
> <groups at tierarzt-mueller.de> wrote:

> Hello Richard Elling and List,
>  
>  all my 3 server with supermicro boards powered the fans with full
>  throttle after power on. After few seconds the speed go to low speed.
>  I have set the Fan Speed Control Modes to Balanced so they all run
>  with +/- 1700 RPM.
>  At Reboot the fans do not turn up to full speed the stay balanced.
>  

>  
>  On Mai, 25 2016, 02:21 <Richard Elling> wrote in [1]:
>  
 >> On May 24, 2016, at 4:37 PM, Robert Fantini <robertfantini at gmail.com> wrote:
>  
 >> I'll check that the next time I'm at the server room, which will not be for a week.
>  
 >> Will check then.
>  
>  
>  
>  
 >> yeah, there is a weird interaction whereby power-on-boot goes to full fans, but a
 >> reboot goes to normal fans. Surely there is software somewhere that controls this,
 >> but haven’t found the time to track it down.
 >>  — richard
>  
>  
 >> Thanks for the fast response!
>  
>  
>  
 >> On Tue, May 24, 2016 at 7:33 PM, Richard Elling
 >> <richard.elling at richardelling.com> wrote:
>  
>  
>  
 >> On May 24, 2016, at 4:28 PM, Robert Fantini <robertfantini at gmail.com> wrote:
>  
 >> we've installed napp-it to a couple of systems .   they run a lot
 >> louder - fans do not seem to be controlled from software.
>  
 >> is there a software package that that can be installed to handle sensors and fans?
>  
 >> Or is this something to deal with in Supermicro bios?
>  
>  
>  
>  
 >> Do the fans slow after a warm reboot?
 >>  — richard
>  
>  
 >>  _______________________________________________
 >> OmniOS-discuss mailing list
 >> OmniOS-discuss at lists.omniti.com
 >> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>  
>  
>  
 >>
 >> --
>  
>  
 >> Richard.Elling at RichardElling.com
 >> +1-760-896-4422
>  
>  
 >>
>  
>  
 >>
>  
>  
 >>
 >> --
>  
>  
 >> Richard.Elling at RichardElling.com
 >> +1-760-896-4422
>  
>  
 >>
 >>
>  --
>  Best Regards
>  Alexander
>  Mai, 25 2016
>  ........
>  [1] mid:0907C745-F18C-4FAA-9174-1D8E29A02F73 at RichardElling.com
>  ........
>  

>  _______________________________________________
>  OmniOS-discuss mailing list
>  OmniOS-discuss at lists.omniti.com
>  http://lists.omniti.com/mailman/listinfo/omnios-discuss
>  


-- 
Best Regards
Alexander
Mai, 25 2016
........
[1] mid:CALnM7zkpc3e_2s26Mv6GzdfM_UiEz2GcbUL8DydG0FQhf1K-KQ at mail.gmail.com
........