<div dir="ltr">Hi All,<div><br></div><div>I have a SuperMicro SSG-2026T-DE2R24L with X8DTS-F-2U motherboard connected to an external chassis with JBOD  and I have the following disks:</div><div>Main Chassis:</div><div>1. HDD Bay 0 - Toshiba 600GB SAS HDD</div>
<div>2. HDD Bay 1 to 9 - Seagate 1TB SAS HDD</div><div>External Chassis:</div><div>1. HDD Bay 0 - Seagate Pulsar.2 100GB SAS SSD</div><div>2. HDD Bay 1 - Seagate Pulsar.2 200GB SAS SSD</div><div>3. HDD Bay 2 - 12 - Seagate 1TB SAS HDD</div>
<div><br></div><div>I booted the server and using IPMI, I was trying to install OmniOS r151008j and I am unable to see the 600GB SAS HDD in the installer GUI at the section where the system search for disks to install the OS. The installer can see all the other disks except the 600GB disk.</div>
<div><br></div><div>I dropped to the shell and using format, the system is able to detect and show me the 600GB disk. Going back to the installer and tried again, still cannot see.</div><div><br></div><div>In the end, I have to remove all the disks and left only the 600GB disk in the system, boot to OmniOS installer and it can see the disk and also able to install.</div>
<div><br></div><div>I would like to know if anybody experience this?</div><div><br></div><div>Also another thing I want to brought up is that the installer GUI, if I have several disks of the same kind and size, it is almost impossible to identify which one as the installer cannot display the full disk ID.</div>
<div><br></div><div>Examples of what I see in the installer:</div><div>Disk 1: c4t5000C5</div><div>Disk 2: c4t5000C5</div><div>Disk 3: c4t5000C5</div><div><br></div><div>The actual disk ID when using "format" or "iostat -En":</div>
<div>Disk 1: c4t5000C50057E39C5Fd0</div><div>Disk 2: c4t5000C50057E65663d0</div><div>Disk 3: c4t5000C50057E765A7d0</div><div><br></div><div>Is there a way for the installer to display the full disk ID?</div><div><br></div>
<div>Thanks & Regards.</div></div>