<div dir="ltr">I'm testing the OmniOS for our storage system. I have a server with two 10G intel network card using the driver ixgbe. <div><br></div><div>I've done the following steps:</div><div><br></div><div>- Create an aggregation interface:</div>

<div><br></div><div>dladm create-aggr -d ixgbe0 -d ixgbe1 aggr0</div><div>ipadm create-if aggr0</div><div>ipadm create-addr -T static -a <a href="http://1.2.3.4/24">1.2.3.4/24</a> aggr0/v4</div><div><br></div><div>- Add a flow-control for the aggregation interface:</div>

<div><br></div><div>flowadm add-flow -l aggr0 -a local_ip=1.2.3.4 flow_aggr0</div><div><br></div><div>After this, if I shutdown one of the interfaces in the switch I loose the connectivity with the server. It seems that the aggregation doesn't forward the traffic to the other interface. </div>

<div><br></div><div>Having one of the ports in the switch down, and without connectivity with the server because of the above issue; If I remove the flow (through the console, of course), the server goes online immediately.</div>

<div><br></div><div>If I add the flow again, the server is innacessible again.</div><div><br></div><div>It seems an incompatibility with the aggreation interfaces and the flow control.</div><div><br></div><div>I've tested this bug with the r151006 and r151010 releases with the same result.</div>

<div><br></div><div>The hardware where I've tested is:</div><div><br></div><div>- Dell PowerEdge R720 with an Intel X520 dual port 10G/SFP</div><div>- Dell PowerEdge C6220 with 10G mezzanine dual port</div><div><br></div>

<div>Does anyone know what can be the problem? Has anyone experienced a similar issue?</div><div><br></div><div>Best regards.</div><div><br><div>-- <br><div dir="ltr"><img src="http://www.stackscale.es/stackscale-firma.png"><br>

</div>
</div></div></div>