<div dir="ltr"><div class="gmail_extra"><br></div><div class="gmail_extra">I'm actually lab'ing with this right now in OmniOS! Although using SRP, and not to ESX initiators...</div><div class="gmail_extra"><br></div><div class="gmail_extra">Currently I have a mini-ITX board with a single PCIe 3.0 x16 slot, populated with a ConnectX-2. zpool is 4x1TB SSD's (on mainboard SATA 6gb/s SATA ports) in a zvol, exported via Comstar to Windows7 SRP initiator (OFED).</div><div class="gmail_extra"><br></div><div class="gmail_extra">Performance is about 1.2GB/s on sequential I/O. I threw log data at it all weekend to see if it would hiccup, so far so good. Not bad, and couldn't have been easier to set up. Essentially plug and play, took my 3 hours from unboxing the board to working SRP target. My currently production environment is Linux/SCST/ConnectX-3. Performance is fine (aggregate bandwidth from a single server is in the 10GB/s area), but configuration is much more involved than Comstar and I'm running into some latency issues. I wanted to give Illumos an IB test drive and see how it held up.</div><div class="gmail_extra"><br></div><div class="gmail_extra">Fortunately, you don't need OpenSM because that switch has an integrated subnet manager.</div><div class="gmail_extra"><br></div><div class="gmail_extra">Not sure if those cards you're using are compatible, but if not, ConnectX-2's are cheap and perform quite well.</div><div class="gmail_extra"><br></div><div class="gmail_extra">Other comments are accurate, the Hermon/Tevor drivers don't seem to have been updated since forever ago (I have yet to investigate Fujita's port of OFED), so you can't use the newer HCA's, but everything does seem stable (and that's what's important, right?) Even on ConnectX-2, you're still using a fabric with twice the bandwidth of 16gb fibre channel... </div><div class="gmail_extra"><br></div><div class="gmail_extra">Good luck, interested to hear what you learn. </div></div>