<html> <head> <style></style></head> <body class='hmmessage'><div dir='ltr'>Hi, I have an OI 7 machine running for quite a while now and installed Omnios r10 into a boot env to see how it behaves on the same hardware. The machine has a mirrored rpool created on two sas disks which are connected to two seperate LSI SAS9207-4i4e HBA's . Each sas disk is connected to its own LSI HBA. When I boot the machine into OI, the rpool mirror is reported as expected. (Running like this for over a year) When I boot it into Omnios the rpool mirror is degraded because Omnios cannot see one of the HBA's. Lsiutil reports only one hba , sasinfo hba -v , same thing echo "::mptsas -t" | mdb -k = ditto So as far as I can see omnios could not detect one of the hba's I have cleaned out path_to_inst, done a reconfiguration reboot and devfsadm -Cv but no succes. I have also installed omnios on OI systems with only one LSI SAS9207-4i4e with no problem. Can someone tell me if it is known if omnios has problems with a dual hba system or how to force omnios to detect the other HBA ? We have also tested with multipath disabled and enabled. Rgds, R </div></body> </html>